14.34.28
Magix - Samplitude Pro X & Suite 12.0.1.81 [19.12.2011, ENG]


[left]
Год/Дата Выпуска: 19.12.2011
Версия: 12.0.1.81 Build DC2
Разработчик: Magix
Разрядность: 32bit+64bit
Совместимость с Vista: полная
Совместимость с Windows 7: полная
Язык интерфейса: Английский
Таблэтка: Отсутствует
Системные требования: 1.5 GHZ CPU, 1 GB RAM

Описание: В данной раздаче предлагаются обновления для Samplitude ProX и Samplitude ProX вышедшее 19.12.2011г. В данное обновление вошли следующие исправления:
12/13/2011 Samplitude Pro X (Suite) 12.0.1.81
-64 bit versions of the following plugins included
-Vandal
-eFX
-Independence MX
-Vita
-When inserting a new plugin or when loading a project, the host matching bit version of the plugin will be loaded automatically (i.e. when loading a 32 bit project in a 64 bit host, also 64 bit plug-ins will be used)
-64 bit version uses vstplugins_x64.ini if present instead of vstplugins.ini
-Sometimes problems with loading of objects that included TS -fixed
-32 bit versions are set LAA and can again address > 2GB
VSTBridge
-UAD-1 is supported
-UAD latency/sync problems -fixed
-Sidechain problems -fixed
-VST MIDI Out implemented

Mixer / FX
-essential FX
-eFX_Reverb: New Plate II Classic Modus
-eFX: load preset from other directory re-implemented
-Build 73: eFX mousewheel handling -fixed
-Hint for Vita 64 download (download link is not online yet)
-Improved Spectral Editing, especially with active stereo display
-Spectral Editing for Wave Editing. Destructive Editing is switched to Virtual Wave Editing for that purpose.
-Visualization: improved and new presets
-Uniformed naming for the preset "Parameters when opening the dialog"
-"Parameters when opening the dialog" preset is also available for VST-Plugins now
-Removed: OK+Cancel from realtime EQ, Dyn, Dist, Delay
-Disabled surround plugin handling for AM-Munition and other plugins
-Show master peakmeter for master track in arranger

Bugfixes:
-Space key didn't work for destructive effects -fixed
-Diverse Fixes for Elastic Audio
-Latency problems when working with objects and pitchshifting while Object Editor is opened -fixed
-VST parameter GUI fixed
-Mixer: Fix for tooltip while automating
-VST "transport changed" handling sometimes only correct for first track -fixed
-Problems with loading of Track FX and nested menus -fixed
Playback/Recording/Sync
-Changed metronome switching behavior (keeps record/playback flags in stopped mode, sets corresponding flag while recording/playback)
-Audio metronome with device different to master didn't work outside hybrid engine
-Exact playback mute for hybrid engine after precount
-Fix for record file name after copy&paste of tracks
-Trackspeed for Virtual Waves
-Support of frame rate 23.976 fps
-Blue Sync-Position-Marker and Timecode-Timedisplay corrected by one ASIO-Buffer
-MMC problem with Record Ready -fixed
-MIDI Clock Send stopped during recording if VIP BPM in Sync option was enabled -fixed
Import/Export/File Handling
- "Collect project files" dialog is resizable and has a file date column
-"Remove unused samples"-Dialog can be resized
-Object menu "Edit Wave" opens Virtual Wave Editing if the following ini-entry is set and system option option "General" is enabled:
[Setup] OpenDestructiveWaveProjectForObject=0
-When opening Wave Editing, range from VIP was not always transferred to Wave Editing -fixed
-Bounce Dialog remembers sample rate during session
-Progress bar for Multitrack Bounce and Freeze "File x of Files y"
-Synced range display for export CD-Track by track
-Project offset was not used with time stamp in OE
-BWF Editor: Problem with editing timestamp if record-take does not start at position 0
-Bugfixes for timestamp handling
-Several AAF / OMF fixes
-Extended error message for long paths (PathSizeError)
-RF64 Marker in 16 Bit WAV files was not read -fixed
-RIFF64 files with RF64-extension were not handled correctly -fixed
-Problem with Import of MPEG2 files with MP2 extension -fixed
-Wrong wave graphics with files >4GB -fixed
-Problems if existing HDP had different bit depth than WAV -fixed
-Crash when saving a destructive MP3 project -fixed
-Problems with CD Start Track Option and burning CD-Text, CD Import... -fixed
-Problems with Compare CD -fixed
Docking / Improved Shortcut Handling
-Active docking window is indicated in docking grabber
-Project gets focus after docker is minimized by mouse
-Shortcuts refer to active window, and if not used there are handed to project window
-New shortcut "Set Focus to Docking Window" (Ctrl-B): By subsequent pressing of window shortcuts (e.g. Track Manager) focus will put to that window
-Ctrl+F4, Ctrl+Tab and Ctrl+B shortcuts are automatically added for
older ini-files with standard settings
-"Set focus to project window"(Ctrl-P) always activates project window
-Docking: Problem with Object Editor and MIDI-Editor after undocking them -fixed
-Focus problem in MIDI-Editor -fixed
-Transport scrubbing section did not collapse in docked state -fixed
Enhanced Keyboard Input
-Mixer:
-Improved mixer control selection with cursor keys
-Ctrl-B, Ctrl-F4 Handling
-Context menu key supported
-Manager:
-F2 for renaming
-Context menu key supported
-New menu commands for window access
-Close docking tab (default shortcut Ctrl+F4)
-Next docking tab (default shortcut Ctrl+Tab), also works for project window
-Minimize docker
Improvements for visually impaired users
-.INZ can also be loaded with Open Project dialog. The program will do an automatic restart afterwards.
-Setup_VisuallyImpaired.INZ with collected settings:
-Ini-setting to open new dialogs (Manager...) in un-docked state [Setup]
ForceFloatingWindows=1
-General ini-Setting
[Setup] OptimizeForVisuallyImpaired=-1
or Customize\GUI_OptimizeForVisuallyImpaired.INZ
-Playback triggered with Shift-Space
-Mixer
-Extended control and value display in mixer caption
-TAB and SPACE key in mixer (similar to Cursor down and Enter)
-Visualization:
-Value display (Act, Max, RMS) in dialog title
-FX Dialogs
-Some dialogs can be interpreted better by Screenreaders
-VST-Dialogs do open with Parameter-GUI by default,
Parameter can be edited in a range of 0-100%
-"Remove Plug-in" command VST-Dialog-Menu
MIDI
-MIDI functions are not deactivated automatically if there is no MIDI Out Device (needed for work with VSTi)
-Very slow opening of MIDI Editor -fixed
-Problem with playcursor display in MIDI Editor -fixed
-Fixes for Raster Snap (Half Notes)
Hardware Controller
-Korg NanoKontrol2.cps added
-Problems with controller initialization during program start -fixed
-Problems with re-initialization after changes in HWC-Dialog -fixed
-MIDI-Ping from controller couldn't be set -fixed
-Problems with display and processing of incoming MIDI-Messages -fixed
-Mackie-Protocol: Learning of MIDI-CC with absolute values (not endless) was not possible -fixed
-Learning of invalid MIDI-Messages is prevented
-Problems with "Learn Hardware Controller" (in Mixer menu) -fixed
-Track names of colored tracks did not show up in controller display -fixed
-Frontier Tranzport display problems -fixed
-"Save as…"-dialog showed „Open“-Button -fixed
-Volume scale changed to +12dB matching Sam Pro X skins
-Problems at creation of fader scale -fixed
-Some general stability problems with HW controllers (e.g. EUCON) -fixed
General
-Carbon skin added
-Time Display: New field "Record length (Take)"
-Editing of timestamps in Object Editor
-Marker Manager: Tempo Marker: Double-click shows Tempo-Dialog, Checkbox sets Cursor
Bugfixes
-Fixes for Visualization setup apply button
-Wrong sized dropdown boxes in non-german Visualization setup dialogs -fixed
-Problem with spectroscope scale display -fixed
-Sometimes drawing issues of waveform with scrolling in higher zoom
-Track automation button could switch master automation button after master plugin or automation menu -fixed
-Trackeditor fader section could not be collapsed -fixed
-v11 Menu could not be loaded -fixed
-Mixer size problem when creating a new project with an open mixer -fixed
-Record dialog: Visualization did not open at second opening of record dialog -fixed
-System Setup - "Reset all warnings" also resets Start-Dialog
-Diverse problems with non-western character sets (manager font handling, ID3 tag handling), also Unicode ID3 tags can be read now (if they match the current system language)
-Tooltip for audio engine selection was German only -fixed
-Manager properties (like columns) were sometimes not remembered -fixed
-OE MIDI: missing update on object change
-OE: TS/PS apply to all fix
-OE: default focus not on object name anymore
-All folder tracks did show rubbers of first track in project -fixed
-Wrong track selection display after loading
-Range display vanished when play cursor is positioned -fixed
-Locked objects could be moved into another project -fixed
-Take Composer - Autoscroll is asynchronous -fixed
-Missing take number refresh for project switch -fixed
-Fix for content download after using DLV with dongle
-Bugfixes for effect calculation in virtual waves
-Problems with Robota object synth and multi CPU -fixed
-Some crash fixes (Recording, 64 bit combo boxes, main automation menu handling)
-Diverse fixes for Elastic Audio (Pitch Detection, Crashes)
-Crash when playing back EQ116 automation -fixed

Доп. информация: Эти обновления не рекомендуется устанавливать на пропатченый Samplitude(кроме обновлений для Vita), регистрация слетает сразу. Сработает ли существующий патч с этим обновлением не знаю не проверял.

[/left]
" rel="nofollow" target="_blank">[img][/img]


" rel="nofollow" target="_blank">[img][/img]

Скачать Magix - Samplitude Pro X & Suite 12.0.1.81 [19.12.2011, ENG]

Категория: Cкачать скрипты | Просмотров: 610 | Добавил: danbdan | Рейтинг: 0.0/0
Всего комментариев: 0
avatar